ANSI Standard Wafer Type DOE Plated Check Valve

• Customization: Available
• Media: Fresh Water, Sea Water
• Material: Cast Iron
• Model NO.: CSA-00
• Structure: Butterfly
• Pressure: Ordinary Pressure
• Function: Nrvz Silence
• Sealing Form: Gland Packings Globe Valve
• Flow Direction: Unidirection
• Standard: ANSI
• Application: Industrial Usage, Water Industrial Usage
• Size: DN40-DN1000
• Certificate: Dnv,Lr, ABS
• Transport Package: Wooden Case or as Per Clint′ S Requirement
• Specification: CE, SGS
• Trademark: TEC
• Origin: Shangdong, China
• Production Capacity: 20000PCS/Month

Product Description

ANSI Standard Wafer Type Doe Plated Check Valve

1. Availability  

The check valve is available with:
Nominal Diameter DN50 ~ 900 (2 "~ 36"),
Nominal Pressure PN10 ~ PN16, flange connection is EN1092-2 PN10,PN16, ANSI CLASS 125/150,JIS 5K and 10K etc.

1. Function and Characters

1. This valve is mainly used for connection and interruption for the media such as water, oil and others in the pipeline. And the main function of this valve is to stop the medium from back off and bleeding from the container.
2. The face to face of this valve is short, as well as with a small volume and light weight.
3. The disc can be closed quickly.
4. It can be used in both horizontal and vertical piping, which is also convenient for installation.
5. With a small fluid resistance, the valve is unimpeded.
6. It is flexible, with good sealing.
7. The structure is simple and compact, and the appearance is beautiful.

1. Material of Main Components

Body	Disc	Seat		Stem	Spring
GG25,GGG40, WCB, CF8, CF8M	DI+Ni, CF8, CF8M, C954, C958	NBR, EPDM	304,316		304,316

1. The Main Performance

Name	DN	Testing Pressure (MPa)	Applicable Temperature ºC	Applicable Media
Check Valve	DN50~900	strength test(1.5xPN) Seal test(1.1xPN) low-pressure Seal test(0.6MPa)	NBR(-18ºC~80ºC EPDM(-29ºC~120ºC)	Water, Oil etc.

 

1. Relevant Standard

 

• • Design standard: EN12334
  • Face to face dimensions: EN558-1/ISO 5752 16 series
  • Flange standard: EN 1092-2 PN10, PN16
  • Test and approvals: EN12266-1

 

1.  Installation and Maintenance

1. Installation method
   1. Cross check nameplates carefully for the correct pressure rated and sized valve selection with required material and valve type for the corresponding pipeline before the use
   2. Before installation, ensure the mark of the flow direction is in accordance with flow direction of medium.
   3. Clean the pipeline for the oil degreasing and to remove other impurities before installation.
   4. The valve should be handled with care during the transportation
   5. Before the installation, remove the dust plugs from the valve firstly.
   6. The valve should be in close position when it is installed against the pipeline.
   7. When installing the valve against the pipes, please put the suitable gaskets between flanges, and tighten the flanges on the cross by using proper bolts.
   8. The valve can be installed in both vertical and horizontal way.
2. Storage and Maintenance
   1. Please keep the valve in a dry and ventilated room, both ends of which shall be covered with dust plugs, to ensure the internal body of the valve is clean.
   2. The valve should be coated with dust proof oil and checked regularly if it is going to be stored for a long time.
   3. If the valve is stored outdoors, it should be packed up off the ground, and wrapped up and protected by plastic film.
   4. When starting using the valve out of long-term storage room, the user should check if the sealing function is performing and make sure to fill up the operational parts with lubricating oil.
   5. The valve in use should be checked and the nuts should be tightened regularly to ensure its performance.
   6. The valve is offered with one year warranty (no more than 18 months after delivery), if there is any claimed defect in material or manufacturing oversight under normal use, upon the approval by Afcon, Afcon will be committed to replace the gaskets, packing, discs (if necessary), seats, etc
   7. Keep a clean working environment in order to prolong the service life of the valve.